ROAD MARKING PAINTS KSM 5333 Listed

HOT MELT THERMOPLASTIC PAINT (Powder Type)
   
  As a marking medium for traffic roads,conventionally liquid paint has been used which usually cause a
traffic jam due to its comparatively longer time for marking. To minimize the operation of marking time
and to enhance the resistance of the layer to wear, water and alkalis, we newly developed this non-solvent
type of thermoplastic powdered paint which dries quickly after applied.

 
     
   
PROPERTIES
   
  1 Since this is non-solvent based, It dries quickly and hence traffic runs immediately after work.
2. Good resistance of the layer to weather, wear, water and alkalis enables this can be applied without any limitation for marking on asphalt or concrete of roads.

3 Adhesive strength can be greatly improved by using BINEX primer.
4 Road marking with this type of paint can be achieved all the year round lust exception of rainy, snowy and icing weather.


 
 
 
   
TYPE OF PRODUCTS
   
 
Type Color Remarks Packing

Screed Type

Spray Type

White & Yellow

Specify the mixing ratio of glass beads

25kg Waterproof PP bag

Primer

 

.
Round 18 iron can
 
PHYSICAL SPECS
   
 

Specific
Gravity
(20/20 )

Non-Volatiles(%)

Compressive
Strength(kg/cm2)

Softening
Point (c)

Resistance to Abrasion(mg)

2.0

99.5

250

98

95